17-20" BARITONE & TENOR UKE, SHORT SCALE MANDOLA, OCTIVE MANDOLIN - NOTCHED EDGE

Short scale dual notched edge designed for baritone & tenor ukuleles, short scale mandolas and octave mandolins.
 
Scale Range 17" to 20" inclusive.
Short Edge Range  17" - 18.5"
Long Edge Range 18.5" - 20"
(Maximum Fretwire Size 2.4mm)
 
MULTIPLE SCALES THROUGH INNOVATIVE TOOL DESIGN
Our guitar notched edge tools are designed to assess the length of the fretboard that can be deflected. The highest frets are excluded, since these are past the neck heel, where the fretboard is unlikely to be affected by truss rod adjustments.
 
This approach minimises the number of notches required, and the notch spacing design enables the tool to be used for any guitar scale, that falls within the specified tool range.
 
PRECISION IN-HOUSE MANUFACTURE
The notched straight edges are machined in-house using specialised carbide tooling. The edges are finished with ultra fine grit abrasive over a precision surface table.
 
POSITIONING ON THE GUITAR NECK
The positioning of the tool on the guitar neck will depend on the scale of the instrument.
The largest notch is placed over the 1st or 2nd fret depending on the particular scale of the instrument.