BASS + GUITAR FRET SLOTTING BUNDLE - With Extended Base

This package is for an extended fret slotting jig base supplied with 34", 25.5" & 24.75" Fret Scale Template Sets.
 
USING THE JIG
Review the 3-minute guide on using the jig.
 
CONTENTS:
Extended Jig Base 715mm x 78mm .
3x Template Sets as per specification.
Datum Slot Locator.
2.5mm Depth Guitar Fretsaw with 5x 32TPI Blades.
 
INCLUDED FIXED DEPTH FRETSAW
The jig is supplied with a 2.5mm depth fretsaw. This can be substituted for an alternative depth if preferred. (Sanding the board radius afterwards will reduce the fret slot depth at the edges of the fretboard and the 2.5mm saw leaves sufficient depth of slot for the majority of fret wire sizes).
 
A popular alternative is a 2.0mm saw which is suitable for flatter boards typically 15" radius and above. Please leave a note at the checkout if you would prefer the 2.0mm alternative.
 
BLADE SPECIFICATION
Premium Quality Blades (manufactured by Bahco).
Hardened & Tempered Carbon Steel.
Milled & Set Teeth.
Nominal Kerf Width 0.55mm.
5x Blades Included.