GUITAR NUT MAKING SYSTEM - With String Spacing Guides & Slotting Files

Due to overseas shipping restrictions, this item is UK supply only.
Age verification will be required on receipt.
 
To order for UK delivery – CONTACT US DIRECT
 
 
Full guitar nut making system with nut shaping jig, string spacing guides and nut slotting tools.
 
The jig gauges the nut slot depth and creates a precise datum to work from. String spacing and nut filing adjustments are performed off the guitar, using an exact comparison of the instrument as a reference.
 
USING THE JIG
See the 3-minute guide on using the jig for making a guitar nut.
 
TYPICAL USE:
6-String Electric Guitar
12-String Electric Guitar
6-String Acoustic Guitar
12-String Acoustic Guitar
6-String Classical Guitar
4-5-6 String Bass Guitar
7-String Guitar
8-String Guitar
Mandolin
Ukulele
 
STRING SPACING DISTANCES OBTAINABLE:
4 String Bass : 24.0 to 36.1mm (24 increments)
5 String Bass : 34.6 to 47.6mm (19 increments)
6 String Guitar & Bass : 29.5 to 59.1mm (39 increments)
7 String Guitar : 35.9 to 61.9mm (31 increments)
8 String Guitar : 42.3 to 61.0mm (21 increments)
12 String Guitar : As per 6-String Guitar
 
CONTENTS
Guitar Nut & Saddle Vice.
Guitar Nut Top Profile Templates for 7.25", 9.5", 10", 12", 14", 16", 17", 20" & Flat.
Guitar Nut String Action Templates for  7.25", 9.5", 10", 12", 14", 16", 17", 20" & Flat.
Fretboard Radius Gauges for 7.25", 9.5", 10", 12", 14", 16", 17" &  20".
4-5-6-7-8 String Guitar Nut Spacing Guides.
String Spacing Diagrams.
Nut Slotting Set (see below).
 
NUT SLOTTING SET
3-PART SET CONTENTS:
Tool #1 -  Feathered Edge String Groove Marker
Tool #2 -  Rhombus Diamond File
Tool #3 -  Pointed Oval Diamond File
 
TOOL #1 - FEATHERED EDGE STRING GROOVE MARKER
The tool is designed for creating marking grooves for the string slots in conjunction with the spacing guides. The tool can also be used for producing slots for high trebles by canting left and right. 
 
TOOL #2 - RHOMBUS DIAMOND FILE
The file can be used for intermediate strings. The profile is straight and cross-section is diamond making it useful for de-burring, chamfering edges and adding relief to the rear and sides of the string slots also.
 
TOOL #3 - POINTED OVAL DIAMOND FILE
The profile is tapered and cross section is oval. The tool can be used for the intermediate and bass string slots by canting the file left and right. Finishing each slot should be performed with attention to the best position along the file edge for the string gauge.