EXTRA LENGTH SLOTTING JIG FOR BARITONE & BASS GUITAR - Scale Range 28" to 37"

**10% DISCOUNT ON SELECTED SCALES** - While current inventory remains.

COMPLETE SYSTEM
The jig is a larger version of our standard slotting jig for use on bass guitars and baritone guitars. The jig will also accept the smaller standard guitar scale templates.
 
USING THE JIG
Review the 3-minute guide on using the jig.
 
INCLUDED:
Fret Slotting Jig Base - 715mm long x 78mm wide .
Fret Scale Templates (Over 10 sizes in stock).
Fretsaw - 2.5mm Fixed Depth.
Datum Fret Slot Locator.
5x Fretsaw Blades.
 
INCLUDED FIXED DEPTH FRETSAW
The jig is supplied with a 2.5mm fretsaw This can be substituted for an alternative depth if preferred. (Sanding the board radius afterwards will reduce the fret slot depth at the edges of the fretboard and the 2.5mm saw leaves sufficient depth of slot for the majority of fret wire sizes). 
 
A popular alternative is a 2.0mm saw which is suitable for flatter boards typically 15" radius and above. Please leave a note at the checkout if you would prefer the 2.0mm alternative.
 
MIXED BLADE PACK
The included blade pack contains 5 blades with nominal widths and quantities as below.
1x 0.5mm kerf width
3x 0.6mm kerf width
1x 0.7mm kerf width
Please note that some variance should be expected due to manufacturing tolerances. (All blades are rounded up or down to the closest nominal size).