FRET END BEVEL FILE - Variable angle from 0 to 35 degrees

For use on bolt on guitar necks only.
 
Our Adjustable Fret End Bevel File provides a solution for alternative bevel angles, with the file angle being fully adjustable from 0 to 35 degrees.
 
This is also useful where the string position encroaches on the fret ends and a steeper bevel angle is necessary to avoid string roll off, particularly on frets closer to the nut.
 
Precision machined from high-quality oak, the radiussed underside guarantees smooth travel and a consistent bevel angle along the frets. The hand finished edges ensure a comfortable grip during use.
 
The file is mounted in a cyllndrical bar which can be pivoted to the desired bevel angle. The bar angle is locked via allen head screws at each end of the tool.
 
A flush reference pin & notched end plate enable easy selection of angles from 0 to 35 degrees.

The nominal tool length is 5-1/2" (145mm). The file grade is 2nd cut smooth - designed for high removal rate combined with a good finish and is suitable for alloy and stainless steel frets. The file is removeable allowing each side to be fully utilised and is clamped securely using allen head screws at the side.

The tool body is fine finished with wax for protection against moisture.
 
Please note the tool is not suitable for use on acoustic guitars or thru-neck guitars.